USED Reloading Dies

Related products

• Out of stock
  270 Brass

  270 Brass

  Rated 0 out of 5

  $33.99 Select options This product has multiple variants. The options may be chosen on the product page

  270 Brass, Primed, Fully Processed, 2.527 and below +/- .0005, Hand processed and selected.

• 
  Reloading Equipment

  Manual Rollsizer

  Rated 0 out of 5

  $590.00 – $750.00Price range: $590.00 through $750.00 Select options This product has multiple variants. The options may be chosen on the product page

  The Manual rollsizer uses the same rolling parts as the DC unit, but requires manual cranking (or your own electric drill). The crank effort required is minimal.

  The rollsizer can be connected to your Dillon case feeder using the standard supplied hose and adaptor clip or connected to other case feeder types with some modifications. As of January 2023 we will have adaptor clip / hose assemblies to connect to a Lyman Casefeeder with the Twist style locking adaptor. This is a separate order and cannot be exchanged with the Dillon adaptor / hose supplied as standard.

  No, you cannot upgrade the manual rollsizer to a DC drive at a later stage with parts from a DC rollsizer. The gearbox internals are different. We get asked this regularly and the answer is still the same.

  The rollsizer is supplied with 1/4″ hex drive bits to connect your portable drill to the rollsizer. Simply remove the crank handle and insert the hex bit into your drill and the bolt fitted into the end of the crank handle shaft and run it. These are available at most hardware stores and should be replaced when they start showing wear.

  That’s it, too easy.

  Please note, all Rollsizer.com machines come with a Tube and adaptor to suit a Dillon casefeeder As Standard supply. The rollsizer should be mounted to your work bench for best operation.

  Calibre conversion discs and drop tubes are selected automatically when you use the “Buy a Rollsizer” tab. this will ensure you purchase the correct parts.

  Machine only dimensions: 270mm x 250mm x 230mm

• 
  Hornady Dies

  DC Compact Electric Rollsizer

  Rated 0 out of 5

  $1,090.00 – $1,260.00Price range: $1,090.00 through $1,260.00 Select options This product has multiple variants. The options may be chosen on the product page

  The DC Electric Drive Rollsizer is suitable for the low to medium volume reloader. The DC electric rollsizer produces a similar result as the large scale rollsizer but at a lower cost (and processing rate – 1,500 Cases per hour vs 6,400 cases per hour). The DC rollsizers require a minimum run in period of 2-6 hours before use but may occasionally need longer time (up to 12 hours). Running them unloaded overnight is usually best.

  The Rollsizer is supplied with a hose and adaptor (as standard) to connect to your Dillon casefeeder. From January 2023 we will have adaptor clip / hose assemblies to connect to a Lyman Casefeeder with the Twist style locking adaptor. This is a separate order and cannot be exchanged with the Dillon adaptor / hose supplied as standard.

  The standard supply also includes a small spares kit and a very high quality AC to DC power converter and a moulded plug or Plug adaptor to suit your local power supply as standard.

  Calibre conversion discs and drop tubes are calculated automatically when you pick the calibres you want. This will ensure you purchase the correct parts. in some situations you will

  Machine only dimensions: 270mm x 250mm x 230mm

• 
  9mm

  Lee 4 Hole Classic Turret Press

  Rated 0 out of 5

  $749.99 Add to cart

  Used Lee 4 Hole Classic Turret Press 9mm Package Deal and Accessories
  2- Lee Classic Turret Presses

  Free Shipping