$39.99
30-06 Fully Processed Brass, FL Sized, washed and primed. 2.481 and below, Bag of 50 CT
30-06 Brass, Fully Processed, Full Length Sized, washed and primed. 2.481 and below, Reminton, Federal, Winchester, Military, Mixed Hand checked and separated. Bag of 50 CT
All brass came under the Recommended Trim length from the factory. If slightly trimmed, it was to even out the neck of the case.
| Weight | N/A |
|---|---|
| 30-06 Brass | 30-06 Federal Brass, 30-06 Military Brass, 30-06 Mixed Brass, 30-06 Reminton Brass, 30-06 Winchester Brass |
Only logged in customers who have purchased this product may leave a review.
The DC Electric Drive Rollsizer is suitable for the low to medium volume reloader. The DC electric rollsizer produces a similar result as the large scale rollsizer but at a lower cost (and processing rate – 1,500 Cases per hour vs 6,400 cases per hour). The DC rollsizers require a minimum run in period of 2-6 hours before use but may occasionally need longer time (up to 12 hours). Running them unloaded overnight is usually best.
The Rollsizer is supplied with a hose and adaptor (as standard) to connect to your Dillon casefeeder. From January 2023 we will have adaptor clip / hose assemblies to connect to a Lyman Casefeeder with the Twist style locking adaptor. This is a separate order and cannot be exchanged with the Dillon adaptor / hose supplied as standard.
The standard supply also includes a small spares kit and a very high quality AC to DC power converter and a moulded plug or Plug adaptor to suit your local power supply as standard.
Calibre conversion discs and drop tubes are calculated automatically when you pick the calibres you want. This will ensure you purchase the correct parts. in some situations you will
Machine only dimensions: 270mm x 250mm x 230mm
Once Fired, Mixed Head Stamped, Processed Brass
38 Special Range Brass
Once Fired, Mixed Head Stamped, Fully Processed Brass
USED Lee, RCBS, Hornady Reloading Dies
Reviews
There are no reviews yet.